 |
|
RESIDENTIAL —
 Planned Maintenance,
AC and Heating Checks
Safety and Efficiency Agreement
Want to be on a planned maintenance program? Become a Preferred Customer with a Safety & Efficiency Agreement from QLS and have the peace of mind of not having to remember to have your HVAC serviced.
With this agreement, you are now considered a Preferred Customer which entitles you to absolute priority service, extended warranties, cash discounts, and most importantly: Peace of Mind.
The purpose of this plan is to provide your family with enhanced equipment safety and efficiency as well as extend the life of your equipment. Your family will also appreciate knowing that your equipment has been tested for deadly, odorless, poisonous carbon monoxide gas.
This agreement entitles you to benefit from our exclusive precision tune-up and professional cleaning (PTPC). Here is just a sample of our procedures:
- Clean, level, calibrate thermostat.
- Wash condenser coil
- Replace or wash standard air-filters, provided by customer
- Lubricate all moving parts.
- Adjust all drive belts and pulleys.
- Test all safety controls/devices
- Test, secure, and tighten all electrical connections and terminals.
- Test humidifier operation and set damper, switches, and valves.
- Clean heat exchanger(s), burners, and pilot assemblies.
- Inspect heat exchanger(s), flue assembly, burners, and draft diverters.
- Vacuum & clean all combustion and flue components
- Activate heating or cooling system.
- Test all motors, starting capacitors, run capacitors, and potential relays.
- Test, measure, and record operating temperature and pressures.
- Electronically test for poisonous deadly carbon monoxide gas.
- Test for gas leaks at furnace.
- Provide complete written analysis of our finding along with any recommendations that we may have.
|
SAFETY AND EFFICIENCY AGREEMENT (S.E.A.)
ABSOLUTELY NO RISK MONEY- BACK GUARANTEE & TERMS
$140.00 for 2 checks per year, per system |
All service department parts, materials, and labor shall be discounted at a rate of 15% off our normal price. Emergency service shall be provided after normal working hours at no additional charge. All repair warranties made under this agreement shall be doubled up to three full years, provided that you have maintained continual S.E.A. coverage for the entire warranty period. This agreement shall renew automatically each year, unless canceled by either party with a thirty day written notice. Your 100% total satisfaction is guaranteed. There is absolutely no risk. We will keep you happy. Full payment is due upon acceptance of this agreement. Thank you very much for your investment. We are looking forward to serving your needs!
Click Here to view the Agreement Form |
AC Checks
AC systems are like a car; you need maintenance and to change the oil if you want to extend its life and keeping it running at its optimal performance levels. Let QLS perform that maintenance for you, with our Spring AC Check! Better yet, sign up for a Safety and Efficiency Agreement and you won’t forget!
Precision Air-Conditioning Tune-up Benefits:
- Lower utility bills by reducing energy consumption and waste.
- Extended equipment life.
- Peace of mind for you and your family.
- Fewer repairs, and improved system reliability.
- Increased cooling capacity and efficiency.
WHY?
- Cooling systems work very hard to maintain the quality of living your household expects. The constant stopping, starting and continual operation can wear down a machine quickly and unexpectedly if the proper care and maintenance is not performed. However, by performing preventive maintenance, or servicing your system regularly, you can maximize the lifecycle of your cooling unit and guard against many unexpected failures
- Preventive maintenance inspections performed on a regular basis can uncover leaks, rust, rot, soot, frayed wires and corroded electrical contacts.
OPERATIONS AND CHECKS PROVIDED:
Spring AC Check
1. Chemically clean and thoroughly wash condenser coil(s).
2. Thoroughly clean or replace standard air-filter(s).
3. Wash condensing unit for proper motor and bearing wear.
4. Lubricate motor and fan bearings as well as other moving parts as necessary.
5. Clean and inspect evaporator coil and drain pan when readily accessible.
6. Clean and inspect condensate drain lines and fittings.
7. Clean, level, and calibrate thermostat.
8. Inspect, tighten and test all electrical connections. This includes disconnect switch.
9. Inspect all cooling system electrical wires, connectors, and terminals.
10. Test system starting and running capacitors.
11. Test all controls, switches, relays, transformers, contactors, motors, and fans.
12. Measure starting and running amperes, line voltage, and control voltage.
13. Test system-starting capabilities.
14. Test system for proper airflow and air delivery.
15. Inspect and adjust all safety controls.
16. Monitor refrigerant (Freon) pressures and temperatures.
17. Test and record super- and sub-cooling. Compare with factory specifications.
18. Adjust Freon metering control device per factory/manufactures recommendations.
19. Test and measure air-conditioning system for proper production and capacity.
20. Monitor fan motors and compressor operating temperatures.
21. Complete and present full written report. |
Heating Checks
Heating systems are like a car; you need maintenance and to change the oil if you want to extend its life and keeping it running at its optimal performance levels. Let QLS perform that maintenance for you, with our Fall Heat Check! Better yet, sign up for a Safety and Efficiency Agreement and you won’t forget!
WHY?
- Heating systems work very hard to maintain the quality of living your household expects. The constant stopping, starting and continual operation can wear down a machine quickly and unexpectedly if the proper care and maintenance is not performed. However, by performing preventive maintenance, or servicing your system regularly, you can maximize the lifecycle of your heating unit and guard against many unexpected failures
- Preventive maintenance inspections performed on a regular basis can uncover leaks, rust, rot, soot, frayed wires and corroded electrical contacts.
OPERATIONS AND CHECKS PROVIDED:
Fall Heat Check
1. Inspect and tighten all electrical connections and terminals.
2. Remove, clean, and adjust main gas burners.
3. Remove, clean, and adjust ignition/pilot assembly.
4. Thoroughly brush and vacuum clean the heat-exchanger(s) and combustion chambers.
5. Inspect heat-exchanger(s) & combustion chambers for cracks, rusting, or
problem areas.
6. Clean all return air grills throughout the home.
7. Inspect the flue assembly and test flue gas drafting mechanism.
8. Test and inspect all furnace safety controls.
9. Test, record, and adjust gas pressure.
10. Replace or clean standard air filters.
11. Lubricate all fan motors and all moving parts.
12. Measure and adjust blower for correct airflow.
13. Adjust all dampers and set proper blower speed(s).
14. Clean, level, test, and calibrate thermostat.
15. Measure and record heating system output.
16. Inspect and test thermocouple output as well as pilot safety switch.
17. Measure and record electrical voltage, amperage, and component resistance.
18. Inspect and test all system transformers, relays, contactors, and controls.
Measure performance
19. Repair minor air leaks in plenum and return airdrop.
20. Perform a complete and thorough, room-by-room, electronic carbon monoxide check of
the entire house.
21. Advise customer on other ways to reduce energy consumption, improve safety and
enhance comfort.
|
|
